| Contacts type and composition |
2 C/O |
| contact operation |
Standard |
| [Uc] control circuit voltage |
230 V AC 50/60 Hz |
| [Ithe] conventional enclosed thermal current |
5 A at -40…55 °C |
| Status LED |
With |
| Control type |
Without push-button |
| [Ui] rated insulation voltage |
250 V conforming to IEC |
| [Uimp] rated impulse withstand voltage |
4 kV during 1.2/50 µs conforming to IEC 61810-7 |
| Contacts material |
Silver alloy (Ag/Ni) |
| [Ie] rated operational current |
5 A (AC-1/DC-1) NO conforming to IEC
2.5 A (AC-1/DC-1) NC conforming to IEC
1 A at 28 V (DC-13) NO |
| Minimum switching current |
10 mA |
| Maximum switching voltage |
250 V AC
28 V DC |
| Minimum switching voltage |
17 V |
| Load current |
5 A at 250 V AC
5 A at 28 V DC |
| Maximum switching capacity |
1250 VA AC
140 W DC |
| Minimum switching capacity |
170 mW |
| Operating rate |
<= 1200 cycles/hour under load
<= 18000 cycles/hour no-load |
| Mechanical durability |
10000000 cycles |
| Electrical durability |
100000 cycles for resistive load
50000 cycles, 1 A at 28 V, DC-13 NO |
| Average coil consumption in VA |
1.2 AC |
| Drop-out voltage threshold |
>= 0.15 Uc AC |
| Operating time |
20 ms between coil de-energisation and making of the Off-delay contact
20 ms between coil energisation and making of the On-delay contact |
| Average resistance |
16500 Ohm at 23 °C +/- 15 % |
| Rated operational voltage limits |
184...253 V AC |
| Protection category |
RT I |
| Test levels |
Level A group mounting |
| Operating position |
Any position |
| CAD overall width |
21 mm |
| CAD overall height |
27 mm |
| CAD overall depth |
46 mm |
| Net weight |
0.031 kg |
| Dielectric strength |
2000 V AC between coil and contact with basic insulation
2000 V AC between poles with basic insulation
1000 V AC between contacts with micro disconnection |
| Safety reliability data |
B10d = 100000 |
