Van định hướng SMC VQ21M1-2YZB-C6

Click image for Gallery

Mã sản phẩm: VQ21M1-2YZB-C6
Nhà sản xuất: SMC
Tình trạng: Còn hàng

Giá: Liên hệ
Trước Thuế: Liên hệ

Số lượng: +
-

- Hoặc -

Thêm Yêu thích
Thêm so sánh

0 đánh giá | Viết đánh giá

Mô tả Đánh giá (0)

Configured Specifications

Type	Solenoid Valves	Application	Unit for Manifold Mounting
Number of Ports	2-Port Valve	Mounting Orientation	Manifold Base
Specifications	Standard / Drip-Proof / Lubrication Free	Number of Solenoids	[Single] Single
Switching Type	2-Position Normally Closed	Status at Power Off	Self-Recovery (Spring Return)
Voltage	AC200V	Pipe Port Type	One-Touch Plumbing
Plumbing	Sub-Base Plumbing	Driving Type	Pilot Type Poppet
CV Value	0.33	Connecting Tube Diameter	Ø6
Seal Type	Soft Seal	Pressure Rating(MPa)	0.1 to 0.6
Pilot Air Supply	Internal	Manual Switch	Lock
Lead wire electrical entry	DIN terminal	Manual	Locking type (tool required)
Indicator light / Surge voltage suppressor	With full-wave rectifier circuit (with indicator light / surge voltage suppressor)	Made to order specifications	-
CE compliant	None	Body options	None

2-Port Solenoid Valve (Pilot Operated, For Dry Air) Single Unit Specifications

VQ20 External Appearance

VQ30 external appearance

Symbols

When the valve is closed, IN and OUT are blocked. However, if the pressure in port 2 is greater than the pressure in port 1, the fluid cannot be blocked.

Standard Specification Table

Valve Specifications	Series		VQ20	VQ30
	Valve Construction		Pilot operated 2-port poppet type
	Usable Fluids		Air^*1
	Ambient Temperature and Operating Fluid Temperature		-10 to 50°C ^*2
	Lubrication		Not required
	Manual Operation		Locking type (tool required)^*3
	Impact Resistance / Vibration Resistance		150 / 30 m/s² ^*4
	Enclosure		Dust-proof^*5
	Internal leakage cm³/min		15 or less
	External leakage cm³/min		15 or less
	Mounting Orientation		Free
	Weight		46 g	80 g
Electrical Specifications	Coil Rated Voltage		12 V DC, 24 V DC, 100 V AC, 110 V AC, 200 V AC, 220 V AC
	Allowable Voltage Fluctuation		±10% of rated voltage
	Coil Insulation Type		Class B or equivalent
	Power Consumption	DC (with power-saving circuit)	Inrush: 2.9 W Holding: 0.6 W
		DC (without power-saving circuit)	2.9 W
		AC	2 VA
	Electrical Entry		Grommet, DIN terminal

*1This product is for dry air. Use in clean air and take care that drain and oil content do not get into this product.
*2Use dry air when operating at low temperatures and with no condensation.
*3Manual operation is available for DIN terminal type only.
*4Vibration resistance: No malfunction occurred in 1 sweep test between 8.3 and 2,000 Hz. The test was performed in both energized and de-energized states in the axial and right angle directions of the main valve/armature. (Initial value)
Impact resistance: No malfunctions after testing using a drop-type impact tester under the following conditions: in the axial direction and at a right angle to the main valve and armature in both energized and non-energized states (once for each condition state). (Initial value)
*5DIN terminal type supports dust-proof and blow-proof (IP65) performance.

Structure Drawing

Pilot Operated 2-Port Solenoid Valve For Dry Air structure drawing

Number	Part name	Material
1	Solenoid coil	-
2	Body	Resin
3	Fixed core	SUS
4	Armature	SUS
5	Return Spring	SUS
6	Poppet	NBR
7	Diaphragm assembly	H NBR / Resin

Outline dimensional drawing

VQ20 Series

(Unit: mm)

Inline type / Grommet (G) VQ21A1-□G□-□-□ dimensional drawing 1

Inline type / Grommet (G) VQ21A1-□G□-□-□ dimensional drawing 2

*Broken line indicates bracket mounting type (-F).

L type / Grommet (G) VQ21A1-□G□-□-L□ dimensional drawing 1

L type / Grommet (G) VQ21A1-□G□-□-L□ dimensional drawing 2

*Broken line indicates bracket mounting type (-LF).

VQ30 Series

(Unit: mm)

DIN terminal (Y) VQ31A1-□Y□□-□-□ dimensional drawing 1

DIN terminal (Y) VQ31A1-□Y□□-□-□ dimensional drawing 2